BackBack

Replacement Cartridge Pack for Filteroo Gravity Water Purifier with Ultraceram Cartridge

$154.99

Description

Replacement Cartridge Pack for Filteroo Gravity Water Purifier with Ultraceram Cartridge

This Cartridge Pack Includes:

Ultraceram Gravity Water Filter Replacement Candle with Fluoride & Heavy Metal Removal

ULTRACERAM Filtration with minerals Retained

This is a cartridge which is sometimes called a candle, it is used to filter water for any gravity water filter. It is a great choice with a standard 12.5mm threaded end to install into any gravity water filter so long as the gravity water filter top tank has a minimum hole size of 12.5mm or a maximum hole size around 20mm. (Note: You can drill or file the hole in your water filter top tank to be 12.5mm if required.)

An ideal choice of gravity cartridge for both water tanks or treated city water, it has the best test results we can find for a gravity water filtration cartridge. If you are filtering rain water it is great as it will stop all the bugs & bacteria in the water, whilst at the same time it protects you from any herbicides, pesticides or lead that may wash in from your roof.

Then for treated city water it has super high removal rates for the common contaminants like fluoride, chlorine & chloramine, plus protects from all those other contaminants in the test results below.

This ULTRACERAM cartridge is made from the highest quality ceramic, with coconut shell based granular activated carbon and other proprietary adsorbent medias on the inside. It combines mechanical filtration and physical adsorption processes to reduce a wide variety of drinking water contaminants of both aesthetic and health concerns.

This cartridge has a NSF Certified Ceramic outer shell made from Diatomaceous Earth formed from millions of microscopic silicone shells - compressed to give a 0.5 micron rating to repel any sediments, bugs or bacteria.

The pore structure of the ceramic enables sufficient contact time for the ULTRACERAM to be ideally suited to improving taste and odour as well as reducing Chlorine, Chloramines, Pathogenic Organisms, Volatile Organic Contaminants, Herbicides & Pesticides, Heavy Metals, Semi-Volatile Contaminants and most importantly fluoride.

This unique high-performance ceramic shell cartridge is perfect for treated tap water or untreated water like rainwater from a tank.

You will be battling to find a better gravity cartridge than this, that’s a fact.

This cartridge can be used to replace the filter cartridge for the following filter systems:

What Makes This Product Unique

It is the quality of the Ultraceram cartridge which has passed all the tests at such high removal rates that makes this cartridge so unique. As the water passes through this cartridge slowly, the extra contact time with the cartridge allows for such a wide range of contaminant removal.

Manufactured by KLT Industries in Great Britain who guarantee high-quality materials are always used. This single ceramic gravity candle is a highly efficient ceramic sub micron filter suitable to remove unwanted contaminants from any water supply. It is great for both treated or untreated water.

Operating Performance

Working parameters

  • Working ph range 5.5 - 9.5

Nominal Flow Rate**

  • 1 Litre hour

Capacity

  • To guarantee performance replace every 2000 Litres or every 6 - 12 months when water flow becomes to slow whichever comes first

Product Specifications

  • Cartridge Height 127mm

  • Cartridge Diameter 70mm

  • Cartridge Dry Weight 0.296 kg

  • Hole diameter 12.5mm minimum to 20mm maximum

  • The cartridge stem thread is 12.5mm in diameter and 34mm in length

  • FLOW RATE Approximately 1 litre per hour depending on water quality**

  • ** (defined mean flow, Typical range +25% -20%)

  • *** Product tested by Envirotek Laboratories inc to NSF53 standard

Contaminant Removal

 

Long Lasting Service Life Of 12 Months

Cartridges are very easy to replace and only have to be changed over as required every 2000 litres or 6 to 12 months, whichever comes first.

Due to the filtration of particulate contaminants from the water during use, the flow of water from the filter may reduce over a period of time.

If your cartridge water flow rate slows down it is normally only because the outside of the Ultraceram cartridge has blocked with fine sediments. These sediments do build up and can slow the flow rate over time depending on the volume of sediments in the water supply used to fill the top tank.

To restore the water flow to its normal level, simply remove the cartridge and scrub the surface with a clean scotch brite kitchen scour pad or some 100 grit sandpaper under running water or in a bowl, ensuring that the open ended thread does not contact the water to avoid contamination.

Cleanliness is important, wash your hands before handling the cartridge and take care to ensure that no contamination of the cartridge occurs during cleaning.

Use a glove or similar so your hands don't touch the cartridge as much as possible.

This cartridge is quite thick and can be scrubbed up to 100 times as shown in the image below if that was ever required.

NEVER WASH WITH DETERGENTS OR SECOND HAND SCOURER PADS.

If the filter is left to stand for more than 3 - 4 days without use, it is recommended that one litre of water be allowed to flow through the cartridge to waste before using.



Installation

When installing or replacing any water filtration cartridges, ensure you know what you are doing or have a qualified person to help you or contact us for assistance.

Cleanliness is important. Wash hands before handling the cartridge and take care to ensure that no contamination of the cartridge occurs during assembly.

Use a glove or similar so your hands don't touch the cartridge as much as possible.

  1. Place the sealing washer over the cartridge threaded stem

  2. Place the filter cartridge threaded stem through the hole in the upper section of the top housing from the inside out and secure with a wing nut

  3. Do not over tighten

  4. Ensure that the outlet tap is in the off position

  5. Fill the upper chamber with cold water and allow this to filter through to the lower section.

  6. It is recommended that this first supply of filtered water is thrown away, as it may contain material washed from the filter element

  7. Some black carbon fines may be seen when first using but this will stop fast

  8. For the Filteroo Ceramic filters, flow a minimum of 3 x tanks of water through the cartridge to flush. 

  9. For the Filteroo Blue, flush 1 x tank of water through the cartridge to flush as the Filteroo Blue has a much larger top tank. 

The filter is now ready for use. Enjoy...

Fully Disposable Cartridges

Wrap your worn out cartridges up in old newspaper and place into your rubbish bin.

6 - 12 Months or 2000 litre Life Span


Drinking water pH Elevation Mineral Pad for Bench Top Gravity Water Filters

This replacement mineral pad helps in the slow release of minerals for the FILTEROO Gravity Fed Water Filter.

Also very useful for other drinking water containers for slow release of minerals that assist in the alkalinity of the water.

This replacement mineral pad can be used to replace the mineral pad of:


    Replacement Cartridge for the Deluxe Chrome Shower Filter

    It is suitable for the Deluxe Chrome Shower Filter when the cartridge needs replacing.

    This cartridge has a special compound, (KDF- Copper/Zinc) that effectively eliminates chlorine in your shower water.

    It also reduces Iron Oxides, Hydrogen Sulfide, Lead and odours.

    The Shower Filter cartridge is easy to install and can last up to six months.

    This Cartridge can only be used with

      Why this Cartridge Pack

      To keep your Shower Water Filter performing the best it can. Protecting you from the harsh contaminants found in our water supplies.

      When replaced once every six months, you will continue to keep your water free from Iron Oxides, Hydrogen Sulfide, Lead and odours that may pose a health risk to you and your family.

      With an up to date cartridge, you will enjoy …

      • Healthier, younger looking skin

      • Relief from dry skin and scalp

      • Chlorine free shower

      • Less red and irritated eyes

      • Relief for asthma sufferers

      • Relief for skin conditions 

      How long will it last

      A common flow rate for a shower is 10 litres per minute

      So 10 litres per minute x 30 minutes equals 300 litres per day

      So 300 litres per day x 6 months or 182 days is 54,600 litres

      Filter capacity of 60,000 litres

      Approx 6 month cartridge life

      Quick to change & Easy to DIY

      Filter Cartridges need to be replaced at least twice a year to obtain maximum cleaning and filtering functions for your shower filter.

      What you get is Fresh, SOFT, Clean Filtered water to shower in.

      Service Life can last up to 6 months

      The Shower Filter Cartridge is easy to install and can last up to 6 months depending on the number of persons using the shower and the amount of contaminants in the shower water.

      Installation

      Installation is simple.

      Simply lay a towel on the shower floor in case you drop something, you don't want to crack a tile.

      Unscrew the shower filter housing.

      Remove the old cartridge and replace with the new.

      Retighten the shower filter and ENJOY.

      Free Delivery Australia Wide